First-Time Build: 7S, 270KV N5055, ESC, SuperGlider!

Use this category to DUMP all your Video & Photo Content....
Post Reply
Posts: 28
Joined: Mon Jul 31, 2017 9:54 am

First-Time Build: 7S, 270KV N5055, ESC, SuperGlider!

Post by Jason » Wed Aug 02, 2017 5:57 am

Hi everyone! I've been a long-time lurker of this website, and now I'm finally saving up the money to do this build! Before I pull the trigger on this, I just want to make sure that all of my parts will work together... I've been riding longboards for some time now, so I'm hoping to hit a max of ~20mph and at least 10 miles range.

I live a mostly flat and smooth area, so I shouldn't need a lot of torque (hence the single motor).

Single Bolt On Motor Mount w/ Drive Wheel:
Wheel Pulley
17mm width, Bore 8mm, 60 Teeth, Teeth pitch: 3mm
Motor pulley
17mm width, Bore 8mm, 20 Teeth, Teeth pitch: 3mm
265mm long, 15mm wide, 48 teeth, Teeth pitch: 3mm ... p-503.html ... p-426.html

Motor & Hardware ... p-421.html
Motor 270KV N5055 1400W

ESC,remote and battery kit ... p-525.html

Longboard ... p-462.html ... p-421.html
Paris Trucks
83*52 80a PU wheels

Other Random Things
a lot of XT60 and XT90 plugs
Charging harnesses n stuff

The goal is to have the batteries discharging in series and charging in parallel. I plan to have a cable (along with an anti-spark xt90 plug to connect the whole thing together.

Image gallery here:
14985006731.jpg (126.5 KiB) Viewed 452 times
14937781922.jpg (91.37 KiB) Viewed 452 times
14962425660.jpg (66.34 KiB) Viewed 452 times
15011691750.jpg (123.85 KiB) Viewed 452 times
15007347875.jpg (153.89 KiB) Viewed 452 times

Post Reply